Sample Set - Fuji Xerox ApeosPort-V 4020 User Manual

Note
 Print
Prints the Secure Print job.
Refer to "When [Print] is Selected" (P.363).
When [Print] is Selected
1
Specify how to process the job after printing.
Note
 Print and Delete
Starts printing the job. After printing, the job is deleted.
 Print and Save
Starts printing the job. After printing, the job remains undeleted.
 Cancel
Cancels printing the job.

Sample Set

The following describes how to print or delete jobs stored with the Sample Set feature.
Before printing multiple sets of a document, you can first print one set for trial, and then
print the remaining sets from the machine.
For information on how to operate a Sample Set job, refer to the print driver's help.
Note
For more information, refer to "5 Tools" > "Authentication/Security Settings" > "Authentication" > "Charge/Private Print
Settings" in the Administrator Guide.
1
Select [Sample Set].
• This item is displayed when the booklet layout is set using a printer driver.
• When the orientation of booklet creation cannot be detected, "Booklet Creation" is displayed only.
• The screen as shown on the right does not
appear if [Print Job Confirmation Screen] is
set to [Disabled] in the System
Administration mode. If [Disabled] is
selected, the machine automatically deletes
the job after printing without displaying the
confirmation screen. For more information,
refer to "5 Tools" > "Stored File Settings" >
"Print Job Confirmation Screen" in the
Administrator Guide.
• When [Save as Private Charge Print Job] or [Save as Charge Print Job] is selected in [Receive Control]
under [Charge/Private Print Settings], jobs will not be saved in [Sample Set] under [Secure Print Jobs
& More] even if you select [Sample Set] on the print driver.
Printing and Deleting Stored Jobs
11
363