Machine Installation - Fuji Xerox ApeosPort-V 4020 User Manual

1 Before Using the Machine
1

Machine Installation

20
Switch off and unplug the product when it (i.e., fax function) is not used over
weekends or long holidays. Please note that it cannot receive fax message
during switch-off.
Once a month, switch off this product and check if
 the power cord is plugged firmly into an electrical outlet;
 the plug is not excessively heated, rusted or bent;
 the plug and electrical outlet are free of dust; and
the power cord is not cracked or worn down.

Once you notice any unusual condition, switch off and unplug this product
first and contact your local Fuji Xerox representative.
Do not locate this product where people might step on or trip over the power
cord. Friction or excessive pressure may generate heat and eventually cause
electric shock or a fire accident.
Never locate this product in the following places:
Near radiators or any other heat sources

 Near volatile flammable materials such as curtains
In the hot, humid, dusty or poorly ventilated environment

 In the place receiving direct sunlight
 Near cookers or humidifiers
This product weighs 26 Kg. When moving it, always carry it by a team of two
or more persons to avoid mishandling or injury.
When lifting this product, face the front panel and firmly grip the handholds
provided on both sides of the product. Never lift it by gripping any other
areas. It will prevent you from dropping the product and getting back ache
or injuries.
Locate this product on a level and sturdy surface that can withstand a weight
of 43 Kg. Otherwise, if tilted, the product may fall over and cause injuries.