Copy
You can select [Copy] or [Simple Copy] on the Services Home screen to set the features for
the Copy service.
This section describes the features you can select on the [Copy] screen. The following shows
the reference section for each feature.
You can customize the layout of the features displayed on the [Copy] screen. For more information, refer to "5 Tools" > "Copy
Service Settings" > "Copy Tab - Features Allocation" in the Administrator Guide.
1
Select [Copy] on the Services Home screen.
2
Select a feature on the [Copy] screen.
Reduce/Enlarge (Making Enlarged/Reduced Copies)
This feature allows you to select a copy ratio to enlarge or reduce the size of copies.
1
Specify a copy ratio. You can use the numeric
keypad to specify a value, or [+] and [-] to
specify reduction/enlargement ratios directly.
100%
Copies at the same image size as the original
document.
Auto %
Automatically determines the copy ratio based on the document size and the paper size
specified in [Paper Supply], and copies the document to fit into the paper.
Important • When you use this feature, please be sure to set the original size. For more information, refer to
"Original Orientation (Specifying the Orientation of Loaded Documents)" (P.112).
Copy
3
93