Fuji Xerox ApeosPort-V 4020 User Manual page 274

5 Scan
Note
 Save in
This option is displayed when you select [FTP] or [SMB] in [Transfer Protocol]. Enter a
directory path. When the save location is in the DFS namespace on Windows, enter a folder
name. Up to 128 characters are allowed.
Note
For [FTP]:

Example: mydoc/Scan
 For [SMB]:
Example: mydoc\Scan
 Save in
This option is displayed when you select [SMB (UNC Format)] in [Transfer Protocol].
Enter the following directory path: "\\Host Name\Shared Name\Directory Name". When the
5
save location is in the DFS namespace on Windows, enter "\\Domain Name\Root
Name\Folder Name" or "\\Server Name\Root Name\Folder Name". Up to 260 characters are
allowed.
 User Name
Enter the user name of the computer you are forwarding to. When a user name is not
required for the destination, this field can be skipped.
When you select [FTP] in [Transfer Protocol], up to 97 characters are allowed.
When you select [SMB] in [Transfer Protocol], use one of the following formats:
Note
 For Active Directory:
User name@Domain name (user name: up to 32 characters, domain name: up to 64
characters)
Example: fuji@example.com (fuji: user name, example.com: domain name)
For Windows NT

Domain name\User name (domain name: up to 64 characters, user name: up to 32
characters)
Example: example\fuji (example: domain name, fuji: user name)
 For workgroups:
Local user (up to 32 characters)
Example: Fuji-Taro
 Password
Enter the password for the user name. Up to 32 characters are allowed.
Note
274
• When using the My Folder feature is enabled, [Shared Name] is automatically determined on the
[Scan to PC] screen. If you change the setting of [Shared Name], the [Scan to My Folder] feature is
disabled. You can use the [Scan to My Folder] feature again by selecting [Scan to My Folder] for
[Transfer Protocol].
• The folder name is the same as the link name for Windows Server
• When Scan to My Folder feature is enabled, [Save in] is automatically determined on the [Scan to
PC] screen. If you change the setting of [Save in], the [Scan to My Folder] feature is disabled. You
can use the [Scan to My Folder] feature again by selecting [Scan to My Folder] for [Transfer
Protocol].
• When Scan to My Folder feature is enabled, [User Name] is automatically determined on the [Scan
to PC] screen.
®
Domain:
• When Scan to My Folder feature is enabled, [Password] is automatically determined on the [Scan to
PC] screen. If a user ID is authenticated without a password, this item is not displayed.
®
2003.