Step 2 Selecting The Features - Fuji Xerox ApeosPort-V 4020 User Manual

5 Scan

Step 2 Selecting the Features

On the Services Home screen, you can select the following Scan services: [E-mail], [Store to
Folder], [Network Scanning], [Scan to PC], [Store to USB], [Store & Send Link], and [Store to
WSD]. You can select features for each service.
Note
 E-mail
Scans a document and sends the scanned data as an e-mail attachment after converting
the data to TIFF, JPEG, PDF, DocuWorks, or XML Paper Specification (XPS).
 Store to Folder
Scans a document and saves the scanned data in a folder on the machine.
You need to create a folder in advance. For information on how to create a folder, refer to "5 Tools" > "Setup" > "Create
Folder" in the Administrator Guide.
 Network Scanning
Scans a document using a job template created on CentreWare Internet Services.
5
For information on how to create a job template, refer to the help of CentreWare Internet Services.
Important • To display the online help for CentreWare Internet Services, users need to have the environment to
 Scan to PC
Scans a document and sends the scanned data to a network computer via the FTP or SMB
protocol.
When Scan to My Folder is enabled and the Remote Access feature is available, the scanned
data can be transferred to a different destination according to an authenticated user.
 Store to USB
Scans a document and saves the scanned data to a USB memory device.
 Store & Send Link
Scans a document and temporarily saves the scanned data on the machine. The user is
notified by e-mail of the URL to the location where the scanned data is stored. Then, the user
can access the URL to retrieve the scanned data.
 Store to WSD
You can scan documents on the machine and save the scanned data to your computer. You
can also save the scanned data to another computer on the network.
Note
224
• WSD stands for Web Services on Devices.
• The features to be displayed on the screen depend on the configuration of your machine.
• When the Accounting feature is enabled, a user ID and passcode may be required. Ask your system
administrator for the user ID and passcode.
• To use the Scan services, network settings are required. For information on the network settings,
refer to "9 Scanner Environment Settings" in the Administrator Guide.
connect to the Internet. The communication fee shall be borne by you.
• WSD stands for Web Services on Devices.