5000 Cp Sip Phone Programming - Mitel 5610 IP Dect Stand Configuration And Administration Manual

7. You can configure the desktop phone and cordless handsets as separate extensions, or you can
optionally

Configure the desktop phone and 5610 Cordless Handset in a Personal Ring Group, or

Configure the desktop phone and 5610 handset for Suite Services (typically, used in a
hospitality environment).
Configure a PRG with Call Handoff (Optional)
Personal Ring Groups (PRGs) allow you to associate two or more devices for a single user under a
common, prime directory number (DN). The devices ring simultaneously (Ring All) when the prime
directory number is called. You can use PRGs to twin a person's desktop phone and his or her 5610
Cordless Handset together. The desk phone is considered the prime extension, which is referred to
as the pilot number or prime member of the group. The cordless handset is programmed as a non-
prime member of the group.
You can also program and label a Handoff key on the user's desk phone. Users can press the
Handoff feature key to

push a call that is in progress from their desktop phone to their 5610 cordless handset, or

pull a call that is in progress from their 5610 cordless handset to their desktop phone.
The Handoff key is only supported on Mitel desktop phones. It is not supported on SIP devices and
you cannot program it on a 5610 cordless handset.
Refer to the "Ring Groups
"Features" book of the MCD System Administration Tool online help for programming instructions.
Configure for Suite Services (Optional)
Suite Service provides the ability to group a number of telephone lines through interconnected
hotel/motel rooms, or suites, for the purposes of billing and shared telephone service. Refer to the
following online book in the 3300 System Administration Tool online help for a detailed description of
Suite Services and programming instructions: System Applications

5000 CP SIP Phone Programming

Before you register a 5610 Cordless Handset with the IP DECT Stand, complete the following 5000
CP Database Programming tasks. Refer to the v4.0 or later 5000 CP Features and Programming
Guide and Database Programming online help for detailed instructions:
1. Ensure that the Mitel IP Phone physically connected to the IP DECT Stand is properly
licensed and programmed in the 5000 CP database.
2. Ensure that you have a valid Category F license available for each 5610 Cordless Handset
connected to the IP DECT Stand.
3. Program each 5610 Cordless Handset as a "SIP Phone" (or part of a SIP Phone Group) as
outlined in the v4.0 or later 5000 CP documentation.

Personal" and "Handoff

(Personal Ring Groups)" topics in the

Hospitality
7

Suite Services.