Table of Contents
Advertisement
Tab. 75
PoE class allocation
Class
Max. load, PSE
1
2
3
15.4 W
1) PSE (Power Source Equipment) = power supply device, e.g. a switch
2) PD (Powered Device) = power consumer, e.g. an IP system phone
3) including an MiVoice M530 or MiVoice M535 expansion keypad
4) including up to three MiVoice M530 or MiVoice M535 expansion keypads
You can obtain information on how to operate and register the IP system phones on a
MiVoice Office 400 communication server in the WebAdmin online help.
4. 8. 2
Mitel 6800/6900 SIP phone series
Mitel SIP phones are platform-independent phones with a wide range of features. They
can also be perfectly integrated into one of the Mitel Platforms and used as a system
phone. Mitel SIP Phones on MiVoice Office 400 first support MiVoice Office 400 fea-
tures and have a separate user's guide. Many of the device-specific functions are less
significant or are not used at all. Please read the Mitel SIP administration instructions if
you wish to carry use device-specific functions or carry out device-specific settings.
Device-specific installation instructions are available for installing the phones. You can
obtain information on how to register a Mitel SIP phone on a MiVoice Office 400 com-
munication server in the WebAdmin online help.
4. 8. 3
Standard SIP phones and standard SIP terminals
For information on installation, powering and connection, please refer to the installation
instructions of the corresponding phones and terminals. Information on how to register
Mitel or third-party standard SIP phones and standard SIP terminals as internal users
in MiVoice Office 400 is given in WebAdmin.
4. 8. 4
Mobile/external phones
The integration of mobile/external phones in the MiVoice Office 400 communication
system is described in the System Manual "System Functions and Features".
4. 8. 5
OIP and other applications
Mitel Open Interfaces Platform (OIP) is also available as OIP Virtual Appliance and can
be installed on the same server as the Virtual Appliance communication server. The
operating requirements and installation instructions for the OIP applications
Mitel 415/430
syd-0580/2.1 – R6.1 – 06.2019
1)
Max. power requirement, PD
4.0 W
7.0 W
2)
0.44...3.84 W
3.84...6.49 W
6.49...12.95 W
Installation
IP system phones
MiVoice 5360 IP, MiVoice 5361 IP
3)
MiVoice 5370 IP
, MiVoice 5380 IP
4)
147
Advertisement
Table of Contents
