Phone Lock Settings - Mitel DT690 User Manual
With bluetooth
Hide thumbs
Also See for DT690:
- User manual (123 pages) ,
- Quick reference manual (177 pages) ,
- Quick reference manual (15 pages)
Table of Contents
Advertisement
User Manual
Cordless Telephone DT690 With Bluetooth
Turn the Vibrator on/off
1
Select "Vibrator alert". Choose between "On", "On if silent" (i.e. the vibrator is on
when the phone is muted), or "Off".
2
Select vibrating alert.
3
Press "Back".
Set the Key Sound
This means that every time a key is used, the phone gives a small sound.
1
Select "Key sound". Choose between "Silent, "Click", or "Tone".
2
Select key sound.
3
Press "Back".
It is possible to listen to the key sound by pressing the Soft key "Play".
8.8.2
Phone Lock settings
Activate the Automatic Key lock
1
Select "Locks".
2
Select "Automatic key lock".
3
Select "On" for activation of automatic key lock.
Activate the Phone Lock
The phone can be protected for unauthorized use. If this function is activated a PIN code
has to be entered at power on, or when the handset is placed in a charger - this behaviour
will first be activated when the handset is placed in the charger. The default phone lock
code (0000) can be changed to any 4 -8 digit personalized code.
1
Select "Locks".
2
Select "Auto phone lock".
3
Select "On", or "On in charger".
4
Enter PIN code
5
Press "OK".
If the PIN code is forgotten it can be removed by your distributor.
Deactivate the Phone Lock
1
Select "Locks".
2
Select "Auto phone lock".
3
Select "Off".
4
Enter PIN code
5
Press "OK".
Change PIN code
1
Select "Change PIN code".
2
Enter the old PIN code.
2008-06-12/ Ver. PA15
PRELIMINARY
TD 92474GB
47
Advertisement
Table of Contents
