Answering Calls - Mitel 650 DECT Manual

Dialling and phoning

Answering calls

This section explains the procedure for answering a call.
Answering a call
Your phone is ringing and the indicator LED is flashing. To answer the call, proceed as
follows.
The volume of the ringing call can become very loud. Do not hold the sound aperture up
to your ear.
Ending a call
You want to end the call.
The call duration is displayed both during and after the call.
Call charges are also displayed after any external call which you initiated, provided your
provider supports this function.
22
Press the Call key.
Notes:
• If the caller's phone number is received, it is shown on the display. If
the phone number is stored in the private phone book or in the system,
the display also shows the corresponding name.
• To find out how to make phone calls with the headset, refer to the
chapter "Using a headset", page 25.
• To find out how to activate the automatic hands-free mode, refer to the
chapter "Using your phone in hands-free mode", page 24.
• To find out how to set Auto Answer, refer to chapter "Setting up an
audio profile", page 76.
Press the End key.
Notes:
• To find out how to make phone calls with the headset, refer to the
chapter "Using a headset", page 25.
• To find out how to activate the automatic hands-free mode, refer to the
chapter "Using your phone in hands-free mode", page 24.
Mitel 650 DECT Phone
eud-1722/1.0 – R3.0 – 08.2015