4.8.16
Head Wash menu
Perform head cleaning.
Notes
•
Make sure to use a genuine cleaning fluid (model No.: RJ80U-22-CLN).
Setup Item
Setting Value
Head Wash
Start
Remove
cassettes
—
4.8.17
CR Maintenance menu
Clean the wiper.
Setup Item
Setting Value
CR Maintenance
Start
End
—
4.8.18
Initialization menu
The setting value of the printer is returned to default.
Setup Item
Setting Value
Initialization
ALL
MediaType
Except MediaType
—
Perform head cleaning.
•
[Enter] key:
Perform the head cleaning operation.
The operation panel displays the following contents.
Remove the ink cassette, and install the cleaning cassette.
► Replacing ink cassettes
•
[Cancel] key: Shift to the previous hierarchy without the head cleaning
operation.
► Setup menu
Clean the wiper.
•
[Enter] key:
The print head moves to centre.
The wiper moves forward.
Cleaning the wiper is complete.
•
[Enter] key:
Print head returns to the original position.
The wiper returns to the original position.
•
[Cancel] key: Shift to the previous hierarchy without the wiper
cleaning operation.
► Setup menu
All settings can be returned to factory default.
The settings of the MediaType menu are returned to factory default.
The settings other than the MediaType menu are returned to factory
default.
•
[Enter] key:
Display "Initialling" on the operation panel, and initialize the setting.
•
[Cancel] key: Shift to the previous hierarchy without initialization.
► Setup menu
88
User's Guide ValueJet 1204
Chapter 4: Handling the printer
Description
Description
Description
AP-75740 – Rev 1.1 – 23/01/2007