(2) MediaWidth menu
Setup Item
MediaWidth
**** mm
—
4.8.7 Origin menu
Set this menu when reprinting on the margin, when the printing data position is changed to the position of the
already printed media.
Setup Item
Origin
•
X (media feeding distance):
00000 mm to 9,999 mm
•
Y (print head transferring
distance): 00000 mm to
99999 mm
Confirm Position→E
—
Setting Value
Setting Value
Description
Display the media width that is detected while
initializing.
[Cancel] key: Shift to the previous hierarchy.
► Setup menu
Change the print head position and media feeding distance
with the following keys.
•
[>] key: Decrease the print head transferring distance.
•
[<] key: Increase the print head transferring distance.
•
[+] key: Increase the media feeding distance.
•
[–] key: Decrease the media feeding distance.
1. Starting position
2. Media feeding direction
•
[Enter] key:
Display "Moving Origin Pos.", and move the print head
to the starting position.
The operation panel displays the following contents.
•
[Enter] key or after a certain period of time:
The setting value is determined.
Print head returns to the original position.
Save the setting and shift to the previous hierarchy.
► Setup menu
•
[Cancel] key: Cancel the setting and shift to the
previous hierarchy.
► Setup menu
84
User's Guide ValueJet 1204
Chapter 4: Handling the printer
Description
AP-75740 – Rev 1.1 – 23/01/2007