Table of Contents
Advertisement
3.5 TRANSFER AND TRANSPORTATION
3.5.1 Transferring the printer
(1) Before the transfer
Be sure to read and understand the safety warnings before handling the printer.
Make sure that the printer is switched OFF.
Step 1 :
Dispose of the waste fluid.
Step 2 :
Disconnect the power cable and all other cables.
Step 3 :
Turn the following adjusters to the directions shown in the diagram to loosen.
Step 4 :
•
Stand: 4
•
Winding unit: 2
•
Feed unit: 2
Transfer the printer.
Step 5 :
Notes
•
The casters attached to the stand have been designed for transferring the printer short distances on a
surface in-house.
AP-75720, Rev. 2.0
No.
1
Adjuster
2
Stand
3
Winding unit
4
Feed unit
48
Operations Instruction Osprey 75/102/130
Name
Advertisement
Table of Contents
