Transfer And Transportation - MUTOH ValueJet VJ-1204 User Manual

3.8 TRANSFER AND TRANSPORTATION

Caution
•
Transfer the printer maintaining the horizontal position.
•
Do not place the printer on a slope or vertical position, nor keep the printer upside down. This
to avoid ink leaks inside the printer. Moreover, normal operation after shifting to these
positions cannot be guaranteed.
Verify that the printer is powered ON.
Step 1
Pull out the waste fluid tank.
Step 2
Result: the operation panel displays "No Waste fluid box".
Notes
•
A used waste fluid tank must be put in a vinyl bag or a bag used for this kind of waste.
•
Disposal of a waste fluid tank must be done according to your local laws and regulations.
Install a new waste fluid tank.
Step 3
Verify that the operation panel displays "Exchange Tank? No".
Step 4
Select "Exchange Tank? Yes" and press the [Enter] key.
Step 5
Remove all ink cassettes
Step 6
Switch OFF the printer.
Step 7
•
The operation panel displays "Transport Mode", and the printer starts the ink rejecting operation. This
takes approximately 2 minutes.
N° Description
Waste fluid box
1
N° Description
Waste fluid box
1
41
User's Guide ValueJet 1204
Chapter 3: Installing the Unit
AP-75740 – Rev 1.2 – 6/07/2011