Done By End User - MUTOH ValueJet VJ-1204 User Manual

5.1 DONE BY END USER

Notes
•
Do not insert or drop metal or other objects through openings in the printer. It could lead to an electric
shock and fire.
•
When substances or liquids such as water entered the printer, do NOT use the printer. It could lead to
an electric shock and/or fire. Immediately
Switch OFF the printer,
o
Disconnect the power plug from the electric socket,
o
Contact your local MUTOH dealer.
o
Caution
•
Be sure to switch OFF the printer and to disconnect the power plug when cleaning it.
•
Do not use volatile solvents such as thinner, benzene, or alcohol. These solvents could damage
the printer.
•
Be careful that moisture does not enter the printer. There is a possibility that electric circuits
inside the printer might get short circuited.
•
Do not open covers attached with screws. There is the possibility of an electric shock or printer
breakdown.
maintenance
Outer case
Inside the printer
Head cleaning
Cleaning the wiper
Replacing waste fluide tank
Replacing spitting box absorbent
***: Please contact your local Mutoh reseller for ordering parts.
frequency
Daily
Daily
If print become blurred or
incomplete
Once a week or when blurs or
incompleteness in printing remain
after hed cleaning
Replace if
"NearFullWasteInkTank" is
displayed on the operation panel.
When the spitting box absorbent
becomes deformed, when smears
of ink appear on the media or two
months after replacement
96
User's Guide ValueJet 1204
Chapter 4: Handling the printer
Parts needed
Soft cloth
soft brush / soft cloth
-----
Poly-knit wiper
***
***
AP-75740 – Rev 1.1 – 23/01/2007