Christie roadie 25k User Manual page 4

INTRODUCTION
How The Projector Works
1-2
Roadie 25K User's Manual
Inputs
One analog RGBHV/YPbPr input with 5 BNCs
One DVI-I input for either digital RGB/YCrCb or analog RGB/YPbPr signals
One analog composite-video input, one analog S-video input
Built-in multi-standard decoder
One Dual SD/HD-SDI input
Up to 220 MHz pixel rate
Compatible with all current HDTV formats
Motion adaptive deinterlacing of 50 fps- and 60 fps-originated standard and high-
definition interlaced sources
Inverse telecine deinterlacing of film-originated standard and high-definition
interlaced material with 3:2 pulldown (60 fps) or 2:2 pulldown (50 fps).
Lenses
Choice of standard high-brightness zoom lenses
Choice of optional high-contrast lenses
Manually adjustable zoom, focus and H/V offsets
Optional lens mount for 1.25x anamorphic lens producing 2.39:1 "scope" images
Special Display Functions
Auto setup
Picture-in-Picture
Electronic brightness uniformity, whitelevel edge blending and color matching
Optional image warping/blending for unusual angles and/or screens
Communications and Diagnostics
3 standard keypads: built-in and convertible IR-to-wired remote
Front and rear IR sensors
Ethernet, RS232, RS422 and GPIO control ports
Built-in ChristieNET
LED for 2-digit error codes, plus LCD for text-based status display
Large status light for long-distance alerts
Double voltmeters: one for lamp ballast, one for projection head
'
PROCESSING & PROJECTION:
projection in large screen applications. High brightness light is generated by a short-
arc Xenon lamp, then modulated by three DMD (Digital Micromirror Device) panels
responding to incoming data streams of digitized red, green or blue color
information. As these digital streams flow from the source, light from the responding
"on" pixels of each panel is reflected, converged and then projected to the screen
through one or more front lenses, where all pixel reflections are superimposed in
sharp full-color images.
STACKING & RIGGING:
stacked and, if desired, flown with another framed projection head using the Roadie
25K Stacking and Rigging Kit and standard rigging techniques to secure the two
frames together. Each frame provides precision roll, pitch and yaw adjustments of the
projector for precision image alignments. Corresponding lamp ballasts can be located
up to 100 feet away, flown or not.
(NTSC, NTSC 4.43, PAL, PALM, PALN, PAL60, SECAM)
(installed in one of two optional input slots.)
(ranging from 1.25 up to 8.5:1)
(SELECTED)

connectivity and control
The Roadie 25K accepts a variety of signals for
A projector secured in the optional FredFrame
(ranging from 1:1 up to 8.5:1)
(ChristieTWIST)

can be