Christie roadie 25k User Manual page 185

DVI Input Module
38-804635-xx
Serial Digital Input Module
38-804602-xx
Dual SD/HD-SDI Module
38-804656-xx
PC250 Analog Features
◊
accepts VGA or MAC RGB video
◊
15 pin D connectors for video
◊
active loop-through video outputs
NOTES: 1) This interface does not accept VGA and MAC signals simultaneously.
'
This module can display digital video input signals conforming to the DVI (Digital
Visual Interface) single-channel standard.
Features
◊
Supports Digital Visual Interface (DVI) single-channel
◊
Supports VESA Extended Display Identification Data (EDID)
◊
Provides an active-loop-through using a DVI connector (conforming to
the DVI Specification)
'
This module accepts a serial digital 4:2:2 component video signal (YCbCr) via a
SERIAL IN
single BNC connector. The signal can loop through the
out to another device (such as another projector). Inputs are 75
SDI Features
◊
accepts serial digital 4:2:2 component video (YCbCr)
◊
provides both a
◊
includes status LEDs for signal and error
'
NOTE: Standard with this projector.
This module accepts one or two independent standard- or high-definition serial
digital inputs, decodes them for processing in the main electronics of the projector,
and outputs 10-bit YCbCr 4:2:2 video. Either input can be set as the active primary or
secondary part of a Picture-in-Picture display, and either input can be looped through
to one (or both) of the module's BNC outputs.
See Section 2.5, Connecting Sources for more information.
SERIAL IN SERIAL OUT
and a
OPTIONAL INPUT MODULES
SERIAL OUT
S
terminated.
BNC connector
Roadie 25K User's Manual
BNC
F-3