Christie roadie 25k User Manual page 106

OPERATION
3-50
Roadie 25K User's Manual
Swap Main and PIP Image
SHORT CUT: Press Swap
(
Toggle the current picture-in-picture relationship so that the primary (main) image
becomes secondary (PIP), and the secondary image becomes primary. Swapping is
available only when PIP is enabled.
NOTE: There may be a slight delay when swapping the Primary and Secondary
images.
PIP Enable
SHORT CUT:
( Press
Toggle to display from two
sources at once (Picture-in-
Picture) or the primary
source only. This checkbox
turns the secondary source
on and off.
NOTE: Disable PIP for
Interlaced sources > 35kHz.
PIP Size and Position –
Controls in the PIP Size and
Position menu affect the PIP
(secondary) image, functioning in
the same manner as the main
controls in the Size and Position
menu—see 3.6, Adjusting the
Image for descriptions.
Additional options unique to the
PIP image are:
POSITION PRESETS
–Set the
location of the PIP (secondary)
image in the display.
ASPECT RATIO PRESETS
"Default" or "Anamorphic". Refer back to 3.6, Adjusting the Image (Resize Presets)
for details.
PIP Image Settings —
Adjust the PIP (secondary image) without affecting the size or position. The primary
image remains unchanged. See 3.6, Adjusting the Image for details.
PIP Border Width
Set the desired line thickness for your PIP window border.
PIP Border Color
Select the desired color for the PIP window border.
from your presentation.)
from your presentation.)
SUBMENU
– Set the desired aspect ratio of your PIP image to
SUBMENU