Christie roadie 25k User Manual page 68

OPERATION
3-12
Roadie 25K User's Manual
DEFINING OTHER USES:
special user functions for keys 1 – 5 and 7 – 9 and others. For example,
programmed to trigger RTEs (Real Time Events) or to display custom menus. Refer
to the separate Christie Serial Communications publication.
Proj Projector
Press to access a specific projector within a group of projectors or to confirm if
Proj
the local projector is listening. The number in the "Enter Number" window indicates
which projector is currently listening to commands, and will match the projector
number that has been defined in the Menu Preferences menu.
The "Projector" checkbox (read-only) shows whether or not the projector physically
connected to a keypad is listening to commands from that keypad. A checkmark
means that connected projector is listening; if there is no checkmark, you are
communicating with a different projector.
To control a specific projector with the keypad, enter the 3-digit number assigned to
the projector you want to use. If you switch to a projector other than the one you are
currently using, the checkmark will disappear.
To broadcast to multiple projectors, press
a projector number. Keypad commands will then affect all projectors present. Note
that there is no method of controlling a group of projectors within the same wired
configuration using the wired keypad exclusively, since there is only one wired
protocol available.
NOTES: 1) The "Broadcast Keys" option in the Communications menu must be selected
for only one (any) projector in a serial network. The keypad in use must be OFF
(disabled) for the remaining projectors. See also 2.14 Remote Keypad Protocols and
Conversion, and 3.8, Adjusting System Parameters and Advanced Controls.
Enter
Press (or
Enter
toggle a checkbox, or to accept a parameter adjustment and return to the previous
menu or image.
Exit
Exit
Press to return to the previous level, such as the previous menu.
Exit
NOTE: does not save changes within text editing boxes (including number
Exit
editing of a slidebar value) or within pull-down lists. It acts as a "cancel".
Arrow Keys
Use the
different option within a pull-down list without having to first scroll through options.
These keys also jump to the next page in long menus. See also Editing Text later in
Section 3.
Use the keys to navigate within a menu, pull-down list or text box. On the
standard remote keypad, use the
state for power, shutter and OSD keys. See details provided on the back of the remote
keypad.
Through ASCII messaging on a PC, you can also create
on the standard remote keypad) to select a highlighted item, to
keys to change a slidebar value or checkbox, or to select a
ON and
and then again without entering
Proj Proj
OFF keys to force the corresponding
Func can be