Christie roadie 25k User Manual page 182

SYTEM INTEGRATION
Query Command
Real Time Event
E-2
Roadie 25K User's Manual
'
(GIO?)
(GIO! "HHLLHLH" "OOIOOOI") Reply of pin state and configuration
(GIO? C2)
(GIO! C2 O)
(GIO? 2)
(GIO! H)
'
Use the serial command RTE to specify an action that is initiated at a particular time
or based on an external stimulus.
For General Purpose IO "G"
Parameter
P1
P2
P3
P4
Example 2. Projector powers up when a switch on the external device is turned on.
(GIO C2 I)
(RTE G 2 H "(PWR 1)")
(RTE G 2 L "(PWR 0)")
Request the state and configuration of all pins
Request configuration for pin #2
Reply with pin #2 configuration as output
Request the state of pin #2
Reply with pin #2 state as high
Name Value
RTE type G (Real Time I/O Event)
I/O bit 1-7
Pin state H = High
(1 Character) L = Low
(String) "LHXXXHLX" Combine multiple inputs and
trigger occurs when all conditions are met
Commands Any valid serial protocol command for the
device
Set pin #2 configuration as input
Power on when pin #2 set to high
Power off when pin #2 set to low