Installing A Media Bay Module Into The Expansion Unit - Avaya BCM50 Hardware Installation Manual

BCM50 Hardware & Installation
GASM right hand side dipswitch settings (switch 4–8)
GATM & G4/8x16 dipswitch settings
For the dip switches on the left side, at the rear of the module, set all the
switches to on. For the dip switches on the right side, at the rear of the module
(country profile switches), set all of the switches to off. The module downloads
the country profiles automatically.

Installing a Media Bay Module into the Expansion Unit

1. Ensure that you use an anti-static strap for the installation.
2. Expansion Units are not supplied with blanking plates
30
Country Profile
dip switches
Country Profile
dip switches
NN40011-002 Issue 1.2 BCM50 Rls 6.0