Connecting Cables To The Patch Panel; Reset Button; Graceful Reboot - Avaya BCM50 Hardware Installation Manual

Hide thumbs Also See for BCM50:

Table of Contents

BCM50 Hardware & Installation

Connecting Cables to the Patch Panel

If you are using the optional patch panel, use this procedure to connect the

cables to WFC:

1. Plug the RJ21-end of the cable assembly into the telephony connector.

2. Plug the other end of the cable assembly into the patch panel header.

3. The cable locks in place.

4. Connect the wires (digital telephones, analog telephones, and analog

trunks) to the patch panel.

5. Connect cables to the BCM50 as required.

The BCM Reset button performs two functions:

1. Initialises a graceful reboot

2. Performs an immediate reboot

To access the reset button, you will need a thin, non-metallic object.

Initialising a graceful reboot is the preferred hardware reboot option. The

reboot process can be started safely, without loss of data.

1. Using the thin, non-metallic object, press and hold the reset button for

less than 5 seconds.

2. The reboot process will begin when the system is ready.

NN40011-002 Issue 1.2 BCM50 Rls 6.0

Table of Contents