Upgrading From Bcm50 Rls 3.0/5.0 To Rls. 6.0 - Avaya BCM50 Hardware Installation Manual

Upgrading from BCM50 Rls 3.0/5.0 to Rls. 6.0

Create a Backup of the Rls 3.0/5.0 software: refer to the Backup &
Restore Guide.
Obtain a Keycode file with the Rls 6.0 upgrade entitlement, and also
the Rls 6.0 Upgrade File and Factory Image: refer to the Pre-
Upgrade Activities section of this guide.
Ensure the Time Zone is not set to Factory Default: refer to the
Checking the Time Zone is Set Correctly section of this guide.
Is the BCM50's CSC hardware version 1? Refer to
the Checking the BCM50 Hardware Version
section of this guide.
If the Rls 3.0/5.0 Factory Image
has not been applied, apply it now:
refer to the Applying the Factory
Image section of this guide.
Apply the Keycode File containing the Rls 6.0 upgrade entitlement:
refer to the Applying the Keycode File section of this guide.
Perform the Rls 3.0/5.0 to Rls 6.0 upgrade: refer to the Performing
the Upgrade section of this guide.
Apply the Rls 6.0 Factory Image: refer to the Applying the Factory
Image section of this guide.
Perform any required post-upgrade activities: refer to the Post-
Upgrade Activities section of this guide.
NN40011-002 Issue 1.2 BCM50 Rls 6.0
Yes
BCM50 Hardware & Installation
No
75