BCM50 Hardware & Installation
Hold device (if MOH device is connected via amphenol, do not use
BCM50 faceplate MOH).
Music source port: A jack used to connect a music source to the
BCM50 Main Unit. If you use this port, the music source connections
on the amphenol are disabled.
1 x USB connection: USB Port is used for the Startup Profile, Loading
Keycode files, Backup/Restore, Patch/software Upgrade (check with
your Technical Support as to the appropriate method of patch
application).
Status LED's
Power Connection
1 x cooling fan
1 x router card (BCM50e/be only)
CPU: Motorola PowerQUICC II 8270VR Microprocessor
RAM: 256MB SDRAM
Hard Disk: 40 GB Maxtor SATA
BCM50be
The BCM50be main unit provides similar functionality to the BCM50e main
unit. The difference is that the BCM50be main unit has two integrated BRI
ports replacing the four analog lines on the RJ-21 telephony connector.
10
NN40011-002 Issue 1.2 BCM50 Rls 6.0