Bcm50B - Avaya BCM50 Hardware Installation Manual

Hide thumbs Also See for BCM50:

Table of Contents

BCM50 Hardware & Installation

 1 x The Amphenol Connection: used for the connection of Digital

Extensions, Analog Trunks (non-b models only), Analog Extensions,

Auxiliary Ringer, Page Output, Page Relay, and an alternate Music on

Hold device (if MOH device is connected via amphenol, do not use

BCM50 faceplate MOH).

 Music source port: A jack used to connect a music source to the

BCM50 Main Unit. If you use this port, the music source connections

on the amphenol are disabled.

 1 x USB connection: USB Port is used for the Startup Profile, Loading

Keycode files, Backup/Restore, Patch/software Upgrade (check with

your Technical Support as to the appropriate method of patch

application).

 Status LED's

 Power Connection

 1 x cooling fan

 CPU: Motorola PowerQUICC II 8270VR Microprocessor

 RAM: 256MB SDRAM

 Hard Disk: 40 GB Maxtor SATA

BCM50b

The BCM50b main unit provides similar functionality to the BCM50 main unit.

The difference is that the BCM50b main unit has two integrated BRI ports

replacing the four analog trunks on the RJ-21 telephony connector.

 CSC with integrated BRI in place of integrated GATI.

 keycode BRI ports.

NN40011-002 Issue 1.2 BCM50 Rls 6.0

Table of Contents