Immediate Reboot
Only use this process if the BCM is not responding to the usual reboot
commands, e.g. through Element Manager. Data loss may occur.
1. Using the thin, non-metallic object, press and hold the reset button for
more than 5 seconds.
2. The reboot process will begin immediately.
BCM Command Line Interface
The BCM Command Line Interface (CLI) provides configuration information
and reset utilities and is dependent on which state the BCM is in:
Configuration CLI
Maintenance CLI
Configuration CLI
The Configuration CLI can be accessed during normal operation and provides
the following options:
0 - Exit. The system exits the CLI to the login prompt.
1 - Reboot. The system reboots to the Main OS.
2 - Shutdown. The system shuts down. You need physical access to the
BCM450 hardware to restart the system.
3 - Safe OS. The system reboots to the Safe OS and waits 1 minute for you to
login. When you login within 1 minute, the Maintenance CLI displays. If you do
not login within 1 minute, the system changes to the Main OS.
4 - Configuration Reset. A Level 1 reset occurs. The system resets all
configuration data to the factory defaults.
5 - Software Reset. A Level 2 reset occurs. The system resets all
configuration data and software to the factory defaults.
6 - IP Configuration. You can configure the following basic IP settings:
0 - Return to Previous Menu. The system returns to the main menu.
1 - Hostname. The hostname of the system.
2 - IP Address. The IP address of the system.
3 - Subnet Mask. The subnet mask for the IP address.
4 - Default Gateway. The default gateway for the system.
5 - DHCP Client Mode. Enable or disable the DHCP client.
6 - Commit Changes. Save changes to the IP settings.
7 - Reload Settings. Reload the existing IP settings.
NN40011-002 Issue 1.2 BCM50 Rls 6.0
BCM50 Hardware & Installation
65