3. Insert the Media Bay Module into the unit. You hear a click when the
MBM is firmly seated in the BCM50 Expansion Unit.
4. For MBM removal, pull the ejector lever away from the unit
The BCM50 Expansion Unit can be mounted in a rack, on a wall, or on a
desktop. Typically, the BCM50 Expansion Unit is mounted in the same way
that the Main Unit was mounted
Expansion Unit Connections
The supplied ethernet cable connects the expansion port on the BCM50
Expansion Unit to one of the two expansion ports on the BCM50 Main Unit.
If the BCM50 system has a BCM50 Expansion Unit, perform the following
procedure:
Locate the expansion cable that was supplied with the BCM50
Expansion Unit.
Note: If you do not have the expansion cable, you can use a shielded
category 5e-compliant Ethernet cable (maximum length of 10 m).
Plug one end of the expansion cable into the expansion port on the
BCM50 Expansion Unit.
NN40011-002 Issue 1.2 BCM50 Rls 6.0
.
BCM50 Hardware & Installation
31