Charge unit
The following image shows the charge unit from three different angles. Note that you can leave
the handset in the charge unit when it is not in use.
No.
Label
1
Rechargeable battery slot
2
Cradle
3
Blue handset LED
4
Blue battery LED
5
Battery slot tab
Headset
To use a headset, plug the headset into the headset jack during the talk or handsfree modes.
While using a headset, you can switch between the talk mode and the handsfree mode, but the
headset mode remains active until you unplug the headset.
Upgrade Jig
You require the Upgrade Jig to update the handset firmware.
April 2020
Description
To recharge a spare D100 battery.
To hold the handset upright while it charges.
To indicate when the handset is placed in the charge unit.
To indicate when the battery slot is in use.
To lock the rechargeable battery in place. Press down on this tab
to unlock and remove the battery.
Installing and Administering D100 SIP Wireless Phones
Charge unit
11