Turn On The Tv Set And The Receiver - Strong SRT 8530 User Manual

PART 3 • English

4.1 Turn on the Tv set and the receiver

Wait for the Welcome screen from the receiver on the TV screen and then for the "First Time Installation"
wizard screen to appear.
If your receiver is connected to Tv set by 3rca-3rca cable
(supplied), then necessary to switch TV set to AV input. To do this:
Read corresponded chapter of user manual of your TV set.
„ „
Using remote control of your TV set switch it to AV input. Most of remote controls has dedicated
„ „
button to select source of the signal. Often this button named as: «АV», «VIDEO», «INPUT», «Source»
or symbol sQ_arroW_In. If you have selected correct input then you will see on screen menu of
the receiver named «Майстер налаштувань».
note:
If your receiver is connected to Tv set by hdMI cable
(not supplied with receiver), then necessary to switch TV set to HDMI input. To do this:
Read corresponded chapter of user manual of your TV set.
„ „
Using remote control of your TV set switch it to HDMI input. Most of remote controls has dedicated
„ „
button to select source of the signal. Often this button named as: «АV», «VIDEO», «INPUT», «Source»
or symbol sQ_arroW_In. If you have selected correct input then you will see on screen menu of
the receiver named «Майстер налаштувань».
note:
You can comfortably make some useful adjustments by correctly following through the first installation
procedure.
Menu Language:
Country:
Subtitle Display:
Press blue to go to the next screen.
TV Ratio:
Conversion:
HDMI Resolution:
note
Press blue to go to the next screen.
Depending from brand and model of your TV the name of AV input can be
different, for example: Video1, AV1.
Depending from brand and model of your TV the name of HDMI input can
be different, for example: HDMI1, HDMI2.
Use tu to select OSD language.
Reference information about your location.
Use tu to enable/disable subtitles.
Use tu to select aspect ratio depending on your TV screen format (4:3 or
16:9).
Use tu to change aspect conversion.
Use tu to select screen resolution according to the characteristics and
supported modes of your TV set.
You should confirm the HDMI resolution selection. If you select a resolution
your TV set does not support you will see a black screen. Do not confirm.
Please wait 10 seconds, the receiver will switch back to the previous
resolution value.
7