Table of Contents
Advertisement
2.3 Remote Control
(Fig. 3)
1. DTV/VCR
2. INFO
3. PAUSE
4. EPG
5. EXIT
6. OK
7. VOL+
8. FAVORITE
9. GAME
10. RECALL
11. SUBTITLE
12. TEXT
13. STANDBY
14. MUTE
15. MENU
16. CH+
17. VOL-
18. CH-
19. NUMBER KEYS To select channel numbers or input numbers/letters in menus.
20. AUDIO
21. TV/RADIO
22. COLOR KEYS (RED/GREEN/YELLOW/BLUE):
NOTE:
SUBTITLE/TEXT/LANGUAGE may not be available for all channels
2.4 Installing the Batteries
Remove the battery cover from the remote control and put 2 x AAA size batteries inside the compartment.
The diagram inside the battery compartment shows the correct way to install the batteries.
1. Open the cover
2.5 Using the Remote Control
To use the remote control, point it towards the front of the digital receiver. The remote control has a range of up to 7
metres from the receiver at an angle of up to 60 degrees. (Fig. 4)
The remote control will not operate if its path is blocked.
NOTE:
Sunlight or very bright light will decrease the sensitivity of the remote control.
3.0 CONNECTIONS
CAUTION:
Make sure to check the voltage specification of the wall outlet is the same rating with the receiver. To
prevent the risk of electric shock, do not open the cover or the back of the receiver.
3.1 Connecting to a TV Set
(Fig. 6)
4
To switch between the VCR SCART input and the DTV output mode.
To display information about the program being viewed or further information about the
channel data.
To pause or playback the program being viewed.
To display information about the program being viewed and what's on next.
To return to the previous screen or menu.
To confirm a selection within a menu.
To move around the menu screens or changing the volume in non-menu state.
To access your favourite channels.
To display built-in mini game: Gomoku.
To switch between the last two viewed channels.
To switch between different subtitles that are broadcasted
To open teletext OSD display if teletext available in the broadcasted stream. 2
will call up search function.
To switch the receiver to Standby and ON.
To turn the sound on or off.
To open the Main Menu.
To move around the menu screens or selecting the channels in non-menu state.
To move around the menu screens or changing the volume in non-menu state.
To move around the menu screens or selecting the channels in non-menu state.
To set the sound output, the available settings are STEREO, LEFT, RIGHT, MONO.
To switch between TV channels and Radio stations.
To operate different functions in Menu screens or in viewing mode: RED -set time for sleep
timer, GREEN -Call directly TV List from Main Menu, YELLOW -Multi Picture (9 PIC.).
2. Install batteries
3. Close the cover
PART 1 • English
nd
pressing
Advertisement
Table of Contents
