Remote Control; Installing The Batteries - Strong SRT 8530 User Manual

Table of Contents

Advertisement

7. audІo l/r connector (output, white/red)
8. power adapter connector
9. power on/off switch

2.3 remote control

1. q
2. !
3. 0-9
4. Tv/r
55 
6. fav
7.
8. audIo
9.
10. epg
11. pq
12. tu
13. oK
14. Menu
15.
16. vol +/vol-
17. p+/p-
18. lIsT
19. ch +/ch-
20. opT
21. TeXT
22. sub
555
24. MulTIMedIa buTTons
25. colored buTTons

2.4 Installing the batteries

Open the cover on the remote control unit (RCU) and insert 2 AAA batteries into the compartment.
Correct position of batteries polar diagram shows inside batteries compartment.
1. Open the cover.
2. Insert the batteries.
3. Close the lid.
4
To connect your receiver to your TV set using corresponding right and left
channels of audio inputs in your TV or stereo system.
To connect power adaptor supplied with the receiver. Please, use only
original adapter.
Allows mechanically connect and disconnect power source to
receiver.
Switches the receiver between the working and standby modes.
Enable/disable the audio output of the receiver.
In viewing mode: enters channel number, in menu: enters numeric values.
Switches between TV and radio channels.
Switches to internet connection mode.
Displays the list of favourite channels.
Switches to the previously viewed channel.
Selects the menu track audio support.
Displays information about the current channel and other information
banners.
Enters the Electronic Programme Guide.
In viewing mode: switches to the next/previous channel, in menu mode and
in channel list: moves cursor up and down.
In viewing mode: decreases/increases the volume, in menu mode: for
navigation and changing option settings.
In menu mode: to confirm selection.
Switches to menu mode (to access the main menu of the receiver) and back
to viewing mode.
Exits the menu, submenu or cancels actions.
Increases/decreases the volume level.
In viewing mode: switches to the next/previous channel, in menu mode and
during list browsing: scrolls pages up and down.
In viewing mode: displays the channels list.
In viewing mode: switches to the next/previous channel.
Changes the output video format and for other options settings.
Switches to Videotext mode.
Selects a subtitle language (if subtitles are broadcasted).
Displays messages from the operator.
For viewing multimedia files, trick modes, creating and viewing recordings.
Functions depend on the menu context.
PART 3 • English
Fig. 3
Fig. 4

Advertisement

Table of Contents
loading

Table of Contents