Connecting To Digital Audio Amplifier; Connecting An External Usb Drive; First Installation - Strong SRT 8530 User Manual

note
b: With HDMI cable (not included). We recommend connecting your TV set with the receiver using a
good quality HDMI cable. This connection supports the highest possible quality.
Connect one side of the cable to the connector on the receiver and the other side of the cable to the
„ „
suitable connector on the TV.
note

3.3 connecting to digital audio amplifier

By connecting your receiver to a digital amplifier or home theatre system, you can enjoy the best
possible sound quality and multi-channel audio (depending on broadcast or multimedia file encoding).
Connect your digital audio amplifier or home theatre system with a suitable cable to the S/PDIF
connector on the back of the receiver.

3.4 connecting an external usb drive

Make sure the plug-in USB drive consumes less than 500 mA. If your hard drive consumes more than this
value, use an external power supply for the USB drive. If you use a USB flash drive with an external power
source, you must first connect a USB storage device to a power source, then connect the drive to the
receiver.
note
note

4.0 fIrsT InsTallaTIon

This procedure will enable you to enjoy digital broadcasts just within a few minutes.
It is recommended to follow the Installation Guide step by step. It will guide you through the basic
installation and channel searching process.
note
6
For using the receiver with a TV set with this type of connection please
switch the TV set to video mode. For more details please read chapter 4
first installation.
For using the receiver with a TV set with this type of connection please
switch the TV set to HDMI mode. For more details please read chapter 4
first installation.
It is recommended to use USB 2.0 storage devices or higher for recording
and play back of TV programs or HD movies.
Timeshift/recording and playback only works properly when a fast
USB storage device such as a USB2.0 HDD is connected to the receiver.
Timeshift/recording and playback of HD content requires a sufficient read/
write speed of the used USB storage device.
Ensure that all connections are setup properly. In case of difficulties or
questions, please ask your local dealer or service for assistance.
PART 3 • English
Fig. 6
Fig. 7