Page 1
Digitalni zemaljski HD prijemnik SRT 8526 Priručnik za uporabu User Manual Ručn./ Auto programi Digitalni liste snimanje TV Info zvuk Titlovi MP3/JPG MPEG Pretraga favorita 30 Podsjetnika...
7.0 TRoUblEshooTIng 8.0 TEChnICAl sPECIfICATIon 9.0 APPEnDIx sTRong declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EC and 73/23/EC, Rohs 2002/95/EC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change.
PART 2 • English lICEnsEs ANY USE OF THIS PRODUCT IN ANY MANNER OTHER THAN PERSONAL USE THAT COMPLIES WITH THE MPEG-2 STANDARD FOR ENCODING VIDEO iRMATION FOR PACKAGED MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE MPEG-2 PATENT PORTFOLIO, WHICH LICENSE IS AVAILABLE FROM mPEg lA, llC, 6312 S.
PART 2 • English safety Precautions Never open the receiver cover. It is dangerous to touch the inside of the receiver due to high voltages. Opening the receiver will void the warranty of the product. Refer all maintenance or servicing to suitably qualified personnel. When you are connecting cables, be sure that the receiver is disconnected from the ...
the receiver. Always make backups of data on your USB storage device before using it with this receiver. STRONG will not take responsibility for any loss of information or circumstances caused by loss of information. Please ensure that the USB device is already formatted to FAT/FAT32 or NTFS. If it is not, ...
PART 2 • English In viewing mode: to change to the next/previous channel In menu and channel list mode: to move the cursor up/down. In viewing mode: to decrease/increase the volume In menu mode: for navigation and to change settings in specific menus 10.
PART 2 • English 2.5 Using the remote control Fig. 5 To use the remote control, point it towards the front of your receiver. The remote control supports a range of up to 7 meters distance to the receiver at an angle of up to approx. +-30 degrees. noTE: Managing the receiver will be limited or not possible if there are obstacles between the remote control sensor (at the front panel of the receiver)
PART 2 • English 3.7 Connecting an external Usb storage device Fig. 6 noTE: For details to consider when using a USB storage device please refer to chapter 1.5. 4.0 sTARTIng UP foR ThE fIRsT TImE Ensure that your connections are setup properly. In case of difficulties or questions, please ask your local dealer or service for assistance.
PART 2 • English 5.0 QUICk gUIDE To UsIng YoUR RECEIvER We at STRONG understand that you can’t wait to enjoy your new high definition digital terrestrial receiver. The following quick guide will help you getting familiar with the basic operation of this device.
PART 2 • English 5.3.1 standard information banner The following information will be provided: Channel number and name Current date and time Start and end time of the current event Start and end time of the next event ...
PART 2 • English To choose an event for watching, press ok to open the timer settings. The detailed timer setup is described in chapter 6.4.1. After the timer has been set up, press ExIT to return to the EPG. To close the EPG, press ExIT again. noTE: Event information will be displayed when available.
PART 2 • English 5.9 Playback of recording If recordings were already made you have the possibility to access the HDD Manager directly from viewing mode by pressing the u button. With pq select the record of your choice and with ok start the playback in preview mode.
PART 2 • English To delete a channel, use the pq buttons to select the channel Delete then press the blUE button. Now you will be asked if you want to delete this channel. Press ok to confirm or ExIT to cancel. The channel(s) you delete from the channel list will be permanently removed, also if this channel is part of the favourite list.
PART 2 • English 6.2.1 search setup In the menu Search setup you can set the antenna power and the country in which you live. Use the tu buttons to change the country. Country: Antenna Power: If you use an antenna that can be amplified (i.e. an active indoor/ outdoor antenna) and it requires a voltage of 5 V and doesn’t consume more than 60 mA, then you can set the antenna power to On.
Page 17
PART 2 • English 6.3.1 language setting In this menu you can set your language of choice for menu, audio and subtitles. Use tu to select menu language. OSD Language: Audio Language: Digital TV allows transmitting more than one audio track/ language.
Page 18
PART 2 • English 6.3.3 osD setting Use tu to adjust the level of menu transparency. It is possible to OSD Transparency: adjust your setting in 10% steps, the setting of 0% will configure the menu to be opaque and adjusting 100% will configure the menu to be absolutely transparent.
PART 2 • English 6.4 Tools Press mEnU and use tu to select Tools, then press ok. Following submenus will be displayed: Timers, Information, Change Password, USB Upgrade, OAD Upgrade and Remove USB device. Use pq to select a submenu and press ok or u to access. 6.4.1 Timer The timer function allows you to turn the receiver on and off according to the defined settings.
In the Information menu you can get information about the hardware and software version installed in your receiver. Furthermore, you will find information about our website: www.strong.tv. Please open this menu when you call the hotline or contact the support. The person who answers your call/email might ask for the information given on this screen.
Page 21
PART 2 • English 6.5.1 Records list After selecting this menu a list of the recordings will appear on screen. The recordings are stored in the folder “SRT_4ORDS” which is created on your USB device right after its connection to the receiver for the first time.
PART 2 • English 6.6 multimedia Press mEnU and use tu to select Multimedia, then press ok. Following submenus will be displayed: Picture, Music, Movie, Photo Config and Movie Config. Use pq to select a submenu and press ok or u to access. Before you use the various multimedia functions of your receiver, please ensure that your USB device is connected properly and that it is formatted in the required file system.
PART 2 • English Displays technical details of the currently played file. YElloW: Allows you to play a separate segment of the movie. Press this button once at the time to start the repeat of a segment (the screen will replay A), press the button a second time at the end of the segment (you will see Repeat AB) and the receiver will play this sequence in a loop.
PART 2 • English 7.0 TRoUblEshooTIng There may be many reasons that affect the correct operation of your receiver. If the receiver does not work as you expect, please follow the steps outlined below. If after performing these operations, the receiver does not work well, contact your dealer or service centre in your area. Do not open the receiver cover.
Page 25
PART 2 • English Problem Possible reason Remedy Message “No The channel is scrambled. Either you have tuned to a channel which rights” or “Pay is not part of your subscription or you have TV channel” not been patient enough to wait until the channel of your basic subscription has opened.
Supported formats JPG, PNG, BMP *STRONG can’t guarantee the playback of all files in the mentioned formats. The possibility to playback depends on the used codecs, data rates and resolution. For a detailed list of supported codecs, please refer to the Appendix.
PART 2 • English general data: Input power: AC 100 – 240 V ~ 50/60 Hz Power consumption: 10 W max. (with USB device connected) Power consumption in standby: 6.00 W (without USB device connected) Operating temperature range: 0 ~ +40 °C Storage temperature: -10 ~ +50 °C Operating humidity range:...