Main Menu; Channel Organizer - Strong SRT 8530 User Manual

PART 3 • English
noTe:
noTe:
noTe:

6.0 MaIn Menu

In the main menu you can manage channels, timers, specific receiver settings, multimedia and internet
functions and receive useful information about the receiver, programmes, operator's messages, etc.
The main menu contains the following chapters: Channels Organizer, Settings, Tools, Multimedia and
Information.
To access the main menu, press Menu in viewing mode.
Press to return to the previous menu level or to exit the main menu.

6.1 channel organizer

Use tu to access the menu Channels Organizer, which includes following submenus: Channel Search,
Channels Manager, TV Program Guide, Internet Services and Ethernet Config.
Use pq to select the submenu and press oK.
6.1.1 channel search
This submenu allows you to adjust your channel search settings and perform manual or automatic
channel scans.
Frequency Channel:
Frequency (MHz):
Antenna Power:
The signal strength and quality indicators on the 2nd half of the screen will help you to make sure that
you have signal on the selected frequency channel, as well as to adjust the antenna if necessary.
Manual search / auto search
After setting all channel search parameters you can choose search method by selecting between Manual
Search and Auto Search. The manual search performs scanning only for specified frequency channels and
auto search performs full scanning through the complete frequency channels range.
Use tu to select and press oK to start.
Please ensure that your USB storage device is properly connected to the
receiver and that it is formatted in the required file system.
After exiting the Timeshift mode the recorded file will be deleted. It is not
available for further viewing.
Please define the Timeshift parameters in the Multimedia Config submenu,
as described in chapter 6.4.5.
Specify a frequency channel number on which you would like to search for TV
channels.
Reference information about frequency for the selected frequency channel.
Use tu to turn the antenna power on/off. Before connecting your antenna
to the receiver, please read the user manual of the antenna regarding
antenna powering. This parameter is recommended to set to ON only for
active internal or external antennas which require power supply via antenna
cable with voltage of 5 V DC and consume less than 50 mA. Otherwise, leave
it OFF.
13