Viewing The Teletext; Usage Of External Usb Devices - Strong SRT 8530 User Manual

note:

5.8 viewing the teletext

Press TeXT in viewing mode to view the teletext. Use the coloured buTTons (in accordance with the
bottom of the videotext screen) to navigate between pages or press 0-9 to enter the page number of
the videotext. Press

5.9 usage of external usb devices

Your receiver is equipped with connectors for external USB storage device. When using external USB
devices it is necessary to follow below recommendations and to consider some limitations.
Use USB devices compliant to USB 2.0 specification. If your USB device is not compatible with
„ „
this standard, the manufacturer cannot guarantee satisfactory operation of functions such as
multimedia playback or software upgrade.
Please ensure that the USB device is already formatted to FAT/FAT32 or NTFS. If it is not, please
„ „
format the USB device on the receiver or on your PC.
If you are going to use an external USB hard disk drive (HDD), please make sure that your HDD
„ „
power specifications do not exceed the supported output of your receiver (5V/500 mA). If so, please
use an additional external power adapter for this HDD.
STRONG cannot guarantee compatibility with all types of external USB storage devices.
„ „
Important:
5.9.1 Tv programmes recording
Press 4 in viewing mode to start recording. A "REC" message will appear on the digital display of the
receiver. The indicator of the recording duration will appear at the left upper corner of the TV screen. The
indicator will fade away in a few seconds or by pressing
recording. Press 3 to stop the recording.
noTe:
5.9.2 Timeshift
The Timeshift function allows you not to miss any interesting moments of a programme. Press 2 if you
need to go away for some time but want to resume watching the programme later from this moment
on. The programme will be paused. You will still see the picture with the pause symbol on it. Press u to
continue watching from the paused moment. In this mode the receiver will simultaneously playback
the programme from the paused moment and will continue recording of this programme from the
broadcasting signal.
Use 5 6 for fast forward and rewinding during the timeshifted playback.
Press 3 to exit the timeshifted playback.
12
Please consider that this function supports DVB and TXT subtitles and this
selection only displays them temporarily. Subtitles may not be supported
by every channel or broadcaster.
to exit the teletext.
It is advised not to store important information on the external USB device
used with the receiver. Always make backups of it before you use USB
devices with this receiver. STRONG will not take responsibility for any loss or
damage of information or circumstances caused by the loss of information.
Please ensure that your USB storage device is properly connected to the
receiver and that it is formatted in the required file system.
. Press 4 twice to define the duration for the
PART 3 • English