Accessories; Usage Of External Usb Devices; Your Receiver; Default Pin: 1234 - Strong SRT 8205 User Manual

Digital terrestrial hd receiver
Hide thumbs Also See for SRT 8205:
Table of Contents

Advertisement

1.3 Accessories

Quick Installation Guide
1 Power Supply
1 Remote Control Unit
2x batteries (AAA type)
NOTE:
WARNING:

1.4 Usage of external USB devices

It is recommended to use USB 2.0 storage devices or higher. If your device is not compatible to
USB 2.0 speci cations, recording, playback and other multimedia functions of the receiver might
not work properly.
To ensure best performance of your USB storage device please format it via your receiver (through
the menu "Media Player/HDD Information") to FAT32 system. Other le systems are not supported
by the receiver. However, it is possible to use already NTFS formatted disks.
STRONG cannot guarantee compatibility with all types of USB storage devices.
If you are going to use external USB HDDs (Hard Disk Drives), please consider that power
speci cations may exceed the supported output of your receiver (max. 5 V/800 mA). If so, please
connect your USB HDD to an according external power adapter.
It is advised not to store important information on USB storage devices used with the receiver.
Always make backups of data on your USB storage device before using it with this receiver.
STRONG will not take responsibility for any loss of information or circumstances caused by loss of
information.

2.0 YOUR RECEIVER

2.1 DEFAULT PIN: 1234

2.2 Front Panel

1. USB (at side):
For the appropriate usage with this device, use only power adapters as
listed below (in case of a necessary exchange):
Model: DYGK-5W-050100; Manufacturer: ShenZhen DongYuan HIGH-
Techelectronic Technology Co,.LTD
The usage of other power adapters may cause damage to the device. Such
damage is not covered under warranty.
The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries. If rechargeable
accumulators instead of batteries are going to be used (e.g. NiMH), we
recommend using types with low self-discharge to ensure long time
operation of your remote control.
Connector for USB storage devices (right side panel).
Fig. 1
5

Advertisement

Table of Contents
loading

Table of Contents