Daily Operations; Switching The Receiver On And Off; Changing Channels - Strong SRT 8530 User Manual

Table of Contents

Advertisement

PART 3 • English
If the no access message does not disappear from the screen after 10 minutes, please contact your
Customer Support.

5.0 daIlY operaTIons

In this section you will find the most frequently used functions of the receiver.

5.1 switching the receiver on and off

To switch your receiver ON and OFF, press q. This button is located on the remote control and front
panel of the receiver.
Press q to switch the receiver into the operating mode.
Press q again to switch the receiver into standby mode.
note:
If you plan not to use the receiver for a longer time, please press the power ON/OFF switch on the rear
panel to completely disconnect the receiver from the power source or simply unplug the power adapter
from the outlet.
note:

5.2 changing channels

5.2.1 switch channels in viewing mode
For sequential switching of channels in viewing mode you can use buttons pq or ch +/ch- or
p+/p-. For direct switching to a channel with a certain number you can dial the channel number by using
the buttons 0-9.
5.2.2 switch channels via the channel list
Press lIsT on the remote control in viewing mode to switch between channels via the channel list. A list
of stored channels in the receiver will be displayed on the TV screen. Use pq to highlight a channel in
the channel list and press oK. The channel list window will disappear from the screen and the receiver
will switch to the selected channel.
note:
5.2.3 switching between Tv, radio and favourite channels
The receiver supports the following channel lists:
List of TV channels;
List of radio channels;
Press Tv/r in viewing mode to switch between TV and radio channels.
6 favourite channel lists: Movies, News, Sports, Kids, Culture and Shopping.
In standby mode the receiver does not consume more than 1.00 W of
power.
Please do not forget to switch the power ON/OFF switch on the rear panel
to ON for normal receiver operation.
Use the buttons p+/p- or tu to switch pages up and down in the channel
list.
9

Advertisement

Table of Contents
loading

Table of Contents