Using The Remote Control; Connections; Connecting To Your Aerial Antenna; Connecting To Tv - Strong SRT 8530 User Manual

PART 3 • English
Warning

2.5 using the remote control

To use the remote control point it towards the front of your receiver. The range of the remote control is
up to 7 meters distance to the receiver at an angle of up to ±30 degrees.
note:
note:

3.0 connecTIons

Warning:

3.1 connecting to your aerial antenna

To receive digital broadcast signals, your receiver has to be connected to a terrestrial indoor or outdoor
antenna. Use the antenna cable to connect the aerial with the ANT IN connector on the back of your
receiver. Please ensure that a properly shielded antenna cable and suitable connectors are used.
note

3.2 connecting to Tv

This receiver can be connected to a TV in one of two ways.
a: With 3RCA-3RCA cable (included).
connect the cable from one side to the outputs of the receiver and to the input connectors of the TV
„ „
set. The connection should be done in accordance with the colour-coded connectors.
The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries.
Managing the receiver will be limited or not possible if there are obstacles
between the remote control sensor on the front panel of the receiver and
remote control.
Direct sunlight and very bright light reduces the distance of remote control.
Please make sure that any connection devices or equipment are
disconnected from their main power before you make connections
between them and your receiver.
If the signals at your location are too weak to receive proper signals with
an indoor antenna, we recommend using an outdoor antenna which can
be pointed towards the transmission tower. Ask your local dealer for more
information.
Fig. 5
Fig.
Fig. 6
5