Table of Contents
Advertisement
3.3 Connecting to Tv with sCART cable
The receiver is also equipped with a SCART connector; alternatively, the TV set can be connected to
the receiver using a good quality SCART cable.
3.4 Connecting to Tv with cinch cable
Your receiver is also equipped with Audio L, R and VIDEO connectors. As an alternative you can use
these connections if your TV set doesn't have an HDMI connector.
3.5 Connecting to a digital audio amplifier
By connecting your receiver to a digital amplifier or home theatre system, you can enjoy the best possible
sound quality and multi-channel audio (depending on broadcast). Connect your digital audio amplifier or
home theatre system with a suitable cable to the S/PDIF connector on the back of the receiver.
3.6 Connecting to a digital A/v receiver and Tv using hDmI
By connecting your receiver to an A/V receiver or enhanced digital home theatre system with
HDMI, you will enjoy the best possible sound and picture quality as well as multi-channel audio
(depending on broadcast). Connect the HDMI output of the receiver to the corresponding input of
your A/V system and then connect the HDMI output of the A/V receiver or home theatre system to
your TV set. Select the correct input on your A/V system to watch and listen to programmes. If your
TV set already supports DD audio we recommend you to use the direct connection as described
above in chapter 3.2.
3.7 Connecting an external Usb storage device
noTE:
4.0 sTARTIng UP foR ThE fIRsT TImE
Ensure that your connections are setup properly. In case of difficulties or questions, please ask your
local dealer or service for assistance. It is recommended to follow the Installation Guide step by step.
It will guide you through the basic installation and channel searching process. It will enable you to
enjoy digital HD broadcasts just within a few minutes.
Start by selecting your language using tu. After selecting your language, press q to move the
highlight to Region. Select your region with the tu buttons.
Display Mode:
Aspect Mode:
6
For details to consider when using a USB storage device please refer to
chapter 1.5.
Use tu to switch the HDMI resolution to your value of choice. If
your TV set doesn't support a specific resolution you will see black
picture, but to recover you can use tu for switching to the next
or previous resolution.
Use this option to select the aspect ratio of your TV set and the
preferred conversion method. The options are: Auto (automatic
detection of aspect ratio), 4:3 Panscan (Displays 16:9 broadcasts
full screen and cut upper and lower parts of 16:9 video on your
4:3 TV), 4:3 letterbox (black bars on top and under the picture
on a 4:3 TV) and 16:9 Wide Screen or 16:9 PillarBox (Displays 4:3
broadcast with back pillars at left and right sides on your 16:9 TV)
which you can use for 16:9 TV sets.
PART 2 • English
Fig. 6
Fig. 6
Fig. 6
Fig. 7
Fig. 6
Advertisement
Table of Contents
