Settings - Strong SRT 8530 User Manual

note:
Please check if the parameter Channel Lock in the Parental Control submenu is set to "ON". See chapter
6.2.4.
note:
6.1.3 radio channels
Press Tv/r to switch between TV and radio channels. All functions for radio channels are similar to the
functions available for TV channels. See described in chapter 6.1.3.
6.1.4 electronic programme guide
All functions are described in chapter 5.4.3.
6.1.5 Internet services
In this menu you will get access to portal where various information is provided. Portal is Internet based
service and it's content can be changed by operator. Main services are: Video on demand, broadband TV
services, social networks. User manual for the portal is always available on portal directory Help.
To navigate in portal and applications use lefT/rIghT and up/doWn buttons and confirm selection
by oK button. To return to previous page use rcl_IMg button. To exit from Internet Services use
button.
6.1.6 ethernet configuring
This submenu allows configuring connection to the Internet. It is necessary to select appropriated
method of obtaining of IP address: Auto, Manual or PPPoE. Method of obtaining of IP address depends
from your home networking equipment.
Obtain IP address
If selected Auto then all settings will be done automatically. You can't change any of below items.
note:
If selected Manual then all below items must be filled manually. You should consult to your ISP about
these settings.
If selected PPPoE then you have to enter your Account and Password, then select OK and confirm with
oK button. Please, contact your ISP for details.
note:

6.2 settings

Use tu to access the menu Settings in the main menu, which includes following submenus: Language
Settings, Output Settings, System Settings, Parental Control and Reset Factory Default.
Use pq to select a submenu and press oK.
16
Watching a blocked channel will be possible only after entering your PIN
code.
To unlock a channel please proceed the same way.
Press oK to display a list of available options: Auto, Manual or PPPoE
To use Auto mode your home router should support DHCP and automatic
IP addresses should be enabled in router.
Use PPPoE only if your ISP supports this mode.
PART 3 • English