Technical Specification - Strong SRT 8530 User Manual

Table of Contents

Advertisement

Internet connection
not available.

8.0 TechnIcal specIfIcaTIon

Tuner
Input connector:
Input frequency range:
Input signal level:
Antenna power:
demodulation dvb-T/T2
Demodulation:
Demodulation modes:
Bandwidth:
FFT mode:
Guard interval:
Forward Error Corrections:
video decoder
Profile:
Input bit rate:
Aspect ratio:
combined
Frame rate:
Video resolution:
audio decoder
Audio support:
Digital Plus (E-AC3)
(1)
Audio mode:
Frequency response:
18 kHz ± 0.5 dB
Sampling rate:
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories
(1)
conditional access system
System:
Card reader:
28
Cable is not connected to Ethernet
port
Incorrect settings in the Ethernet
configuration menu
Temporary problems at your ISP
IEC60169-2, female, 75 Ohm nominal
VHF: 177.5 ~ 226.5 MHz
UHF: 474 ~ 858 MHz
DVB-T: -75 ~ -25 dBm
DVB-T2: -80 dBm ~ -25 dBm
5 V DC, max. 50 mA, short cut protected
Compliant to DVB-T (EN 300 744), DVB-T2 (EN 302 755)
QPSK, 16/64/256 QAM
7 or 8 MHz
1K, 2K, 4K; 8K, 16K, 32K normal and extended
DVB-T: 1/32, 1/16, 1/8, 1/4;
DVB-T2: 1/128, 1/32, 1/16, 19/256, 1/8, 19/128, 1/4
DVB-T: 1/2, 2/3, 3/4, 5/6 7/8;
DVB-T2: 1/2, 3/5, 2/3, 3/4, 4/5 5/6
MPEG-2 MP @ ML, MP @ HL, MPEG-4 H.264/AVC
Up to 30 Mbit/s
4:3 Letterbox, Pan&Scan, 16:9 Pillarbox, Widescreen,
25 Hz for PAL
576p, 720p, 1080i, 1080p
MPEG-1 Layer 1 & 2, HE-AAC, Dolby® Digital (AC3), Dolby®
Mono L/R, Stereo
20 Hz ~ 20 kHz, unevenness in the frequency range 60 Hz ~
32, 44.1, 48 kHz
Irdeto CCA
1 slot, conforming to ISO 7816
PART 3 • English
Check cable to be connected firmly
from both sides
Check settings. Call to specialist, if
necessary.
Call your ISP for more information.

Advertisement

Table of Contents
loading

Table of Contents