Pitney Bowes Mailstation 2 Operator's Manual page 19

• Do not remove the ground pin from the line cord.
• Make sure the area in front of the wall outlet into which the machine
is plugged is free from obstruction.
• DO NOT route the power cord over sharp edges or trap it between
pieces of furniture. Make sure there is no strain on the power cord.
• To reduce the risk of fire or electrical shock, DO NOT attempt to
remove covers or disassemble the control panel or its base. The
cabinet encloses hazardous parts. If you should drop or otherwise
damage the unit, call Pitney Bowes.
• Use only Pitney Bowes approved ink, tape strips, and cleaners. To
obtain Material Safety Data Sheets (MSDS) for OSHA requirements,
please go to www.pb.com/msds. When prompted, enter the product
name, manufacturer, the Pitney Bowes MSDS Number, or reorder
number of the item you are interested in.
• Keep fingers, long hair, jewelry and loose clothing away from moving
parts at all times.
• Avoid touching moving parts or materials while the machine is in
use. Before clearing a stall (jam), be sure machine mechanisms
come to a complete stop.
• To prevent overheating, do not cover the vent openings.
CAUTION:
ink accumulation, immediately disconnect the power cord from
the wall plug and contact Pitney Bowes. See Pitney Bowes
Contact List on page v.
• When removing stalled material, avoid using too much force to protect
against minor personal injury and damage to the equipment.
• Use the equipment only for its intended purpose.
• Always follow the specific occupational safety and health
standards prescribed for your workplace.
mailstation 2 Digital Postal Meter | SV61983 Rev. H
™
In case of an ink spill, leaking ink or excessive
1 ● Introduction
1-7