Clearing The Batch Count - Pitney Bowes Mailstation 2 Operator's Manual

Used: $ 0 3 1 . 6 0 0
Available: $ 0 6 8 . 4 0 0
Total Pieces: 2 9
Control Sum: $ 1 0 0 . 0 0
– the total of all postage ever used in the meter
Used
Available – the amount of postage left in the meter
Total Pieces
that had postage applied
Control Sum
the amount Used plus Available. This is a postal requirement that
verifies an accurate accounting of the postage in your meter.
Batch Count
since the last time the batch count was cleared
Batch Value
batch value was cleared
PBP Serial No.
number)

Clearing the Batch Count

IMPORTANT:
you do, you can't restore the data.
Funds.
1. Press
2. Use the Review keys to scroll to "Reset batch postage and pieces?"
and press Enter/yes.
3. Press Enter/yes to confirm that you want to clear these value. The
values return to zero.
Clear/Back to return to the main screen.
4. Press
mailstation 2 Digital Postal Meter | SV61983 Rev. H
™
– the total number of mail pieces run through the meter
– the total of all postage refills for the meter and equals
– the number of mail pieces that had postage applied
– the amount of postage applied since the last time the
– serial number of this meter (normally meter
Make sure you really want to clear the batch count; once
3 ● Running Mail
Account No.: 9 9 9 9 9 9 9 9
Batch Count: 3
Batch Value: $ 0 0 2 . 7 2 0
PBI Serial No.: 1 1 0 0 0 2 4
M A Y 2 6 0 9
4 : 3 3 p
3-5