SiBE12-908
2.12 Removal of Thermistors
Procedure
Step
1. Removal of the assembly
of thermistor
Undo the clip and
1
remove the discharge
pipe thermistor.
Cut off the clamp to pull
2
out the heat exchanger
thermistor.
3
The outdoor air /
discharge pipe / heat
exchanger thermistors
are united as one
assembly.
The figure shows the
4
arrangement of the
assembly of thermistor
[S90].
2. Removal of the liquid /
gas pipe thermistors
1
Remove the liquid / gas
pipe thermistors.
Removal Procedure
Warning
Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Discharge pipe thermistor
Heat exchanger
thermistor
(R9984)
(R7631)
Outdoor air thermistor
(R9985)
(R9986)
Outdoor Unit
Points
Be careful not to lose the clip
for the discharge pipe
thermistor.
(R7702)
The clamp is always
reserved.
Be careful not to lose the
clips for each thermistor.
248