SiBE12-908
1.10 Removal of Fan Rotor
Procedure
Step
1. Removing the drip proof
plate
Dismount the drip proof
1
plate (right) by
removing the 2 screws.
2
Release the fan motor
wire harness.
Removal Procedure
Warning
Be sure to turn off all power supplies at least 10 minutes before
disassembling work.
Procedure
Preparation
Remove the heat exchanger
according to the "Removal
of Heat Exchanger".
(R8112)
Drip proof plate
(R8113)
(R8114)
(R8115)
Indoor Unit
Points
210