Daikin CTXU25G2V1B Service Manual page 108

Operation Manual
NOTE
Notes on WEEKLY TIMER operation
• Do not forget to set the time on the remote controller first.
• The day of the week, ON/OFF TIMER mode, time and set temperature (only for ON TIMER mode) can be set with WEEKLY TIMER.
Other settings for ON TIMER are based on the settings just before the operation.
• Both WEEKLY TIMER and ON/OFF TIMER operation cannot be used at the same time. The ON/OFF TIMER operation has priority if it is
set while WEEKLY TIMER is still active. WEEKLY TIMER is activated after the reserved ON/OFF TIMER operation is completed.
• Only the time and set temperature set with the weekly timer are sent with the "PROGRAM" button.
Set the weekly timer only after setting the operation mode, the fan strength, and the fan direction ahead of time.
• Shutting the breaker off, power failure, and other similar events will render operation of the indoor unit's internal clock inaccurate. Reset the
clock.
• The "BACK" button can be used only for the ON/OFF TIMER mode and time settings.
It cannot be used to go back to the reservation number.
97
8. Press "SELECT" button to select the desired temperature.
• The temperature can be set between 10°C and 32°C.
Cooling: The unit operates at 18°C even if it is set at 10 to 17°C.
Heating: The unit operates at 30°C even if it is set at 31 to 32°C.
• To return to the time setting, press "BACK" button.
• The set temperature is only displayed when setting the ON TIMER.
9. Press "NEXT" button.
• The temperature will be set and go to the next reservation setting.
• To continue further settings, repeat the procedure from STEP 4.
10.Press "PROGRAM" button to complete the setting.
• Be sure to direct the remote controller toward the indoor unit and check for a receiving tone and
flashing the operation lamp.
• " " is displayed on the LCD and WEEKLY TIMER operation is activated.
• The TIMER lamp lights up.
10
9
8
• A reservation made once can be easily copied and the same settings used for another day of the
week.
Refer to
Copy mode
. (page 24.)
SiBE12-908
23
Installation / Operation Manual