Econo Operation - Daikin CTXU25G2V1B Service Manual

SiBE12-908
3.8

ECONO Operation

ECONO Operation

NOTE
• ECONO operation can only be set when the unit is running. Pressing the OFF button causes the setting to be canceled, and the "
disappears from the LCD.
• ECONO operation is a function which enables efficient operation by limiting the power consumption of the outdoor unit (operating
frequency).
• ECONO operation functions in AUTO, COOL, DRY and HEAT modes.
• In case ECONO operation is selected in QUIET operation, QUIET operation will be canceled.
• POWERFUL and ECONO operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
• Power consumption may not drop even if ECONO operation is used of the level of power consumption is already low.
18
Installation / Operation Manual
ECONO operation is a function which enables efficient operation by limiting the maximum
power consumption value.
This function is useful for cases in which attention should be paid to ensure a circuit breaker
will not trip when the product runs alongside other appliances.
To start ECONO operation
1. Press "ECONO" button.
• " " is displayed on the LCD.
To cancel ECONO operation
2. Press "ECONO" button again.
• " " disappears from the LCD.
1, 2
Running current and
power consumption
Normal
operation
ECONO
Mode
• This diagram is a representation for illustrative purposes only.
• The maximum running current and power consumption of the air conditioner in ECONO mode
vary with the connecting outdoor unit.
Maximum during
normal operation
Maximum during
ECONO Mode
Time
From start up until set
temperature is reached
Operation Manual
"
92