Ep Drive Assembly Removal - Lexmark C792 series Service Manual

5062

EP drive assembly removal

See "Rear" on page 7-15
1.
Remove the system board cage with board. See
page 4-155.
2.
Disconnect the cable (A) from the fuser motor.
Note: If you are replacing the cables, remove the toroids from the old cables and use cable ties to attach
the toroids to the new cables.
3.
Remove the eight screws (B).
4-56
Service Manual
for the part number.
"System board cage with board removal" on
A
B (88A0212)
Previous
Next
Go Back