Teletek electronics CA60Plus Installation Manual page 28

up). At the end of the procedure only those LEDs, which correspond to the designated for report mes-
sages, should remain lit up on the display.
1 ALARM
2 PANIC
3 FIRE
4 ON/OFF+BPS
5 MEDICAL
6 TROUBLE
DEFAULT : 1, 2, 3, 4, 5, 6 for the first telephone number. There are no marked streams for the second telephone
number.
*
User protocol transmitted messages are ALARM, FIRE, PANIC, TAMPER, MEDICAL and
manually transmitted TEST signal. These messages are not programmable and are transmitted by
one and the same sound signal in the telephone line.
28
ALARM and TAMPER type messages are transmitted.
PANIC type messages or entered assault code are transmitted.
FIRE and TAMPER type messages are transmitted.
BYPASS, ON/OFF type messages and engineer programming input are
transmitted.
MEDICAL type messages are transmitted.
TROUBLE and TEST type messages are transmitted.
CA60Plus control panel Installation manual