9.3: Dynamic Readings Mode
The External Display puts itself in the Dynamic Readings Mode upon power-up. Use the MODE
button to access the Dynamic Readings from other Modes. Use the UP/DOWN arrows to navigate
from Group to Group within this Mode. See section 9.4 for a navigational map of the Dynamic
Readings Mode.
Group 1: Phase to Neutral Voltages (Use the LEFT/RIGHT arrows to access the following
readings, in order.)
•
Volts AN/BN/CN
•
Maximum Volts AN/BN/CN
•
Minimum Volts AN/BN/CN
•
Volts AN/BN/CN %THD
•
Volts AN/BN/CN Maximum %THD
•
Volts AN/BN/CN Minimum %THD
Group 2: Phase to Phase Voltages (Use the LEFT/RIGHT arrows to access the following readings,
in order.)
•
Volts AB/BC/CA
•
Maximum Volts AB/BC/CA
•
Minimum Volts AB/BC/CA
Group 3: Current (Use the LEFT/RIGHT arrows to access the following readings, in order.)
•
Current A/B/C
•
Maximum Current
•
Minimum Current
•
Current %THD
•
Current Maximum %THD
•
Current Minimum %THD
•
Current Calculated N/Measured N
•
Maximum Current Calculated N/Measured N
Group 4: Watt/VAR (Use the LEFT/RIGHT arrows to access the following readings, in order.)
•
kWatt/kVAR
•
Maximum +kWatt/+kVAR/CoIn kVAR
•
Maximum -kWatt/-kVAR/CoIn kVAR
•
Fixed (Block) Window Average Maximum +kWatt/+kVAR/CoIn kVAR
•
Predictive Sliding (Rolling) Window Maximum +kWatt/+kVAR/CoIn kVAR
Group 5:VA/PF/Frequency (Use the LEFT/RIGHT arrows to access the following readings, in
order.)
•
kVA/PF lag/Hz
•
Maximum kVA/Hz
•
Minimum kVA/Hz
e
Electro Industries/GaugeTech
Doc # E151701
9-2