10.3: Using Multiple Output Modules
LEDs
Female
RS485
Side Port
Reset Button
Output Modules must use the Nexus® 1262/1272
Meter's Port 4.
Set the port to 57600 Baud, Output Module.
10.3.1: Steps for Attaching Multiple Output Modules
1. Each Output module in a group must be assigned a unique address. See the Communicator EXT
User Manual for details on configuring and programming the Output Modules.
2. Determine how many power sources (such as PSIO) are needed for the number of modules in use.
See Section 5.3.11 for details.
Electro Industries/GaugeTech
RS485 Cable
Figure 10.6: Multiple Output Modules
Doc # E151701
Output Port (Size and pin configuration vary)
Group of 3
Output Modules
Addr
160
Communication
ONLY A+, B-
and Shield
Control
Power
Mounting Bracket
External
Power
Source
Addr
Addr
PSIO
128
156
12VA
10-5